Description:
Ecologically clean product, opportunities for multifunctional use in construction industry.

Application:
For making even and strong fine coats, before laying any final material such as parquet, carpet, linoleum, ceramic tiles, and others.
Due to its light weight, VIDANIVEL is suitable in renovating old buildings (trimmer joists and others).
The product is also suitable for application to electrically-heated floors, due to its high coefficient of heat conductivity. Suitable for large surfaces since it does not shrink during the process of drying and therefore there is no need of leaving any expansion joints.

Preparation and Instruction for Use:
Machine application- the density of the compound is set by the appropriate machine adjustments.
Manual application: In a plastic container with water, add the VIDANIVEL dry compound. Stir with a mixer rotating at 400-600 rpm for about 2-3 min. Leave the mixture to “mature” for about 3-5 min., then stir again for another minute. The ready compound is poured evenly, working toward the entrance door of the premises, and each mix must be applied before the previous one has dried out. The already spread compound is treated with a needle roll or a wide pallet in order to remove any air-bubbles and help make the coat surface even. The flooring material can be laid onto the coat after 72 hours.
 The surface beneath the leveling compound must be solid, compact and clean. Any larger or dirty particles which might decrease the adhesive qualities should be removed beforehand. The surface should be then treated with a primer. The primer will reduce the absorbing capacity of the surface beneath the fine coat, will improve the cohesion and prevent air-bubble formation.