Fine gypsum finishing coat.

Powdered gypsum-based construction product with a prolonged working time. Easy to use. For making the finishing coat of concrete and aerated-concrete surfaces, as well as on wall and ceiling mortar, plaster and lime-cement coatings and joint filling.

Application:
- The surface on which the finishing coat will be applied has to be solid, dry, even and without any oil, dust and construction waste impurities.
- The recommended ratio is 1 kg of the coating compound to 500 – 600 ml of pure water according to the desired working consistency. Stir the mixture for about 2 – 3 minutes, wait for another 3 - 4 minutes and then stir it again. Now the mixture is ready to use.
- Prolonged working time, high adhesion strength and extraordinary plasticity.

Technical specifications

Binding time- beginning ≥20 min
Adhesive tensile strength ≥1.0 N/mm²
Form of delivery 1250 kg /pallet. 50 packs /pallet
Consumption allowance 0.9 - 1.0 kg /m³ /1mm
Compressive strength ≥2.0 N/mm²
Packaging mulilayer paper bag